Stainless steel elbow maintenance and cleaning

In daily life, we in the application of stainless steel elbow links, generally only open and full seal, do not agree to do the overall adjustment of the total flow
Not only that, it will avoid the cover of the full and will continue to accelerate the damage, his sampling will be relatively more convenient, the production is relatively simple, and the cost is relatively low

In addition, it will be more common in the application of links, but its relative rigidity is weak, so it can not be used for a series of processes and explosive objects

At the same time, it will also have a series of chemical processes and their high system collocation,which may harm some places, so in the application of links must pay attention to it to carry out a variety of tests

As a device that can reasonably connect two pipes or pipe fittings, elbow flange has been mostly required by some processing areas, naturally under the link of communication

Responsible for the installation of the staff will be fixed on a bent flange, and then the two pipes between the cushion, with bolts together, this can complete the most effective connection, naturally, there are some butler pipe fittings inside or with flanges, in such a case, it should also belong to the flange and elbow connection.

Stainless steel elbow cleaning steps

In daily life, when we use stainless steel elbows, usually only do fully open or fully closed, do not promise to do the whole adjustment process, manufacturing is very simple, and the cost is particularly low. The rigidity of stainless steel elbow is relatively poor

Therefore, it can not be used for a series of processes and explosive objects, at the same time, there are a series of chemical processes and high system matching, which may be harmful on some occasions, therefore, before use must pay attention to its comprehensive inspection.

If you are not familiar with such an elbow flange part, then we must pay attention to the flange must not be long-term storage, be sure to do the regular inspection, and often carry out a series of cleaning of the exposed area outside

To ensure that it is exposed to the outside area, and there is no damage, it is best to maximize to ensure that it is cleaned layer, remove stains, neat storage in the house, to ensure that the indoor are dry and ventilated, do not carry out outdoor accumulation.

Pipe fittings surface application of gasoline or cleaning agent to remove dirt, when the oil is serious, with 3-5% alkali solution to remove oil, and rinse clean, stainless steel thermal parts of the oxide skin can be through the mechanical sandblasting square method, removal, sand must be pure silicon or alumina, clean water, determine the necessary appliances and labor protection supplies