Stainless steel tee processing technology

Stainless steel tee is a kind of pipe fittings with excellent performance and corrosion resistance. There is a big difference between tee and elbow, but tee also plays an important role in pipeline construction

Although the stainless steel tee has strong corrosion resistance, it still needs to be paid attention to in actual storage, otherwise it is likely to have a great impact on the quality of the tee.

Stainless steel tee storage

After the production and processing of tee, it is necessary to seal the tee and handle it carefully to prevent the tee from being oxidized, passivation of the surface of the tee, which needs to be wrapped with three layers of canvas to strengthen maintenance. Although stainless steel has strong corrosion resistance and robustness, it is still necessary to make protective plates.

These protective plates are better made of stainless steel or lead plates. When transporting tees, be sure to put them in a sealed box. The open box must be covered with canvas and the end of the tube must be plugged with plastic

When storing stainless steel tee, other materials should be avoided to affect the tee, so that pollution such as moisture and dust can be better prevented.

Stainless steel tee is polished by mirror, the product is connected by seamless welding technology, the weld is smooth, to meet the user's strict requirements for wire drawing, bending and other processing.

Compared with the round tube, the stainless steel tee usually has a certain moment of inertia and section modulus, which has strong bending resistance and torsion resistance, and can greatly reduce the net weight of the structure and save materials.

Stainless steel tee strength is large, can withstand a certain degree of strong vibration and impact, tee has fire, shock, no water seepage, the corresponding degree does not burst characteristics

At the same time, stainless steel tee has been widely used, in the case of uncontrollable water quality, the stability of tee can effectively prevent the pollution of material elements.

Stainless steel tee production process

Hot forming requires the use of tube billets with a diameter of more than three as raw materials, it is compressed into the required diameter of the three, the branch pipe is drilled, and then fired and heated, and then put into the mold

At the same time, the stamping die of the drawing branch pipe is put into the tube blank, and the tube blank is radial compressed by the hydraulic press, and the stainless steel tee can be generated by the drawing die. ] The difference between the two is that the hot-pressed branch pipe is compensated by the radial motion of the tube blank, which is called the radial compensation process