Knowledge of TPEP anti-corrosion steel pipe

The use of TPEP anti-corrosion steel pipe can prevent and alleviate the corrosion caused by chemical changes in the transport and application process, which mainly has the characteristics of small pipe roughness, smooth inner wall and good hydraulic characteristics.

Therefore, TPEP anticorrosive steel pipe is usually used for a variety of conditions, such as coal mine water supply and drainage, underground shotcrete, thermal power plant process waste water, return water transmission pipe, etc. Although TPEP anticorrosive steel pipe is widely used in people's lives, we should pay attention to the following problems in the

TPEP anticorrosive steel pipe use specification

This kind of anticorrosive steel pipe is buried under the ground, and the key is composed of the inlet pipe, pipe body and outlet section, and the pipe body needs to be set on a better foundation, and can not be stored on the fill of the dam

In addition, it is necessary to set a concrete cushion between the pipe body and the foundation, set an expansion joint along the pipe spacing of 11 to 22 meters, and set a water stop valve at the joint, which can moderately thicken the anti-leakage structure such as the clay core wall

Then backfill 1~2 meters of anti-seepage soil material outside the pipeline, and set a sealing ring 11~22 meters apart outside the pipeline to increase the diameter of the seepage on the surface of the pipeline, which is also to prevent the accumulation of seepage.

If the ordinary steel pipe is used in a harsh environment, it is likely to have obvious corrosion, and then reduce the service life of the steel pipe, then the anti-corrosion steel pipe is directly at this stage, but many of these anti-corrosion steel pipes, the size of the variety is also more common, so we need to use in the transport link to grasp the way to prevent damage caused by insufficient delivery.

In the process of realizing the application of TPEP anti-corrosion steel pipe, attention should be paid to its prevention of oil damage and some chemical damage. In the storage link, pay attention to horizontal placement

In addition, the stacking height should not exceed 1.6 meters, which is also to prevent the collapse caused by too much stacking, which will cause the steel pipe to be scratched and destroyed.

TPEP anti-corrosion steel pipe delivery point

Because the ordinary steel pipe is used in a harsh environment, there will be serious corrosion, which will reduce the service life of the steel pipe, then the anti-corrosion steel pipe came into being; And because the production of anti-corrosion steel pipe manufacturers more

There are many specifications and types of TPEP anti-corrosion steel pipes on the market, and the product needs to master the correct way in the transportation process to avoid damage caused by unreasonable transportation.

In the process of transportation, attention should not be paid to throwing and other strong collisions to avoid damaging the product such as scratches

In the process of application and storage, it is necessary to pay attention to the fact that it should avoid the pollution of oil and some other chemicals, and should also avoid the heat source, because the pipe will cause deformation due to high temperature

TPEP anticorrosive steel pipes can be stored indoors or outdoors, and need to be covered with a cover when storing outdoors to avoid exposure to the sun and rain.