Stainless steel elbow types and knowledge

In ordinary life, in the process of using stainless steel elbows, we often think that only open all or full seal, and do not promise to do the whole control flow

In addition, it will avoid the enrichment of the cover, and will continue to speed up the damage, his materials will be relatively more convenient, the production is relatively simple, and the production cost is relatively low

Types of elbows

Elbow is a very important part of the pipe system, elbow and bend are similar, but there are some differences. The main function of the elbow is to connect two pipes of the same diameter, thereby changing the direction of the pipe.

Elbows are made of a variety of materials, generally made of stainless steel, alloy steel or carbon steel, of course, there are some other materials of the elbow, but other materials of the elbow is relatively few.

There are many types of elbow, according to the production process of elbow can be divided into welding elbow and stamping elbow. The most common elbow Angle is 45 degrees and 90 degrees, of course, there are 180 degrees of elbow, in the actual pipeline construction process, elbow is widely used in chemical industry, water supply, oil and construction and other fields

Processes using stainless steel elbows

In addition, it will be more common in the process of use, but its stiffness is relatively poor, so it can not be used for a series of processes and their explosive objects

In addition, he also has a series of chemical processes and their higher possible combinations, may hurt some occasions, so in the process of use must pay attention to it to carry out a comprehensive test.

As a device that can reasonably connect two pipes or pipe fittings in one piece, most of them have long been required by some production areas, and naturally in the connection process, they will first determine a bend flange

Then the middle of the two pipe fittings coupled with a gasket, bolted in a piece, which can be the most effective connection, naturally, there are some butler pipe fittings inside or with flanges, in this case, it is also a flange and elbow connection.

If you are not familiar with the flange parts of such a stainless steel elbow, then we must pay attention to the flange must not be placed for a long time

Regular inspections must be done, and a series of cleaning of the exposed areas must be carried out from time to time to ensure that there is no damage to the exposed areas

And it is best to ensure a greater level of cleaning, remove stains, placed neatly in the house, to ensure that the indoor dry and ventilated, prohibit outdoor accumulation.