Spiral steel pipe surface and rust removal treatment
The spiral steel pipe is durable and practical, has become the key signal of engineering construction, the pipe maintenance media transport is one of the key materials, spiral steel pipe is the steel oil pipeline, gas pipeline, water supply pipe, heating pipe outer wall anticorrosion construction, pipe durability enhancement to what kind of layer is most suitable, the manufacturer to explain
In order to better enhance the service life of the anti-corrosion spiral pipe, the manufacturer should carry out the appropriate surface treatment, which is helpful to enhance the service life of the steel pipe.
Spiral steel pipe surface treatment
The stolen goods to be covered on the surface of the spiral steel pipe can be removed by using the corresponding processing, which can solve the organic matter on the surface of the spiral steel pipe, but it can not solve the surface layer rust, oxide, welding, etc., so cleaning can only be used as an auxiliary way.
The use of wire brush, sandpaper and other equipment to polish the anticorrosive spiral pipe surface layer can remove the loose oxide, rust, welding slag and so on
The selection of organic chemical pickling process for pipeline corrosion protection can remove the oxide surface, rust, and old coating, and can make the surface layer achieve the corresponding cleanliness and roughness.
According to the high-power motor to drive the spraying (throwing) blade high-speed operation, so that steel sand, steel balls, iron wire segments, minerals and other abrades under the function of centrifugal force to carry out spraying (throwing) shooting cleaning on the surface layer of anti-corrosion steel pipe
It can not only completely eliminate rust, oxides and dirt, but also achieve the required symmetrical roughness under the function of strong abrasive impact and friction
Spiral steel pipe rust removal technology
The first kind is to use the method of rust removal treatment, the application of solvent and its emulsion solution to the method of the manufacturer's appearance is able to solve the above oxide and oil stains such dirt is very good and clean, so that you can clean the rust method, if we encounter rust is not very serious when we can apply this method to solve.
Second, we can use specialized rust removal tools to solve the rust clean, first use a wire brush to clean the oxide brush above, but this method can not completely rust method completely, there will still be some oxide residue on the surface of the manufacturer
Therefore, the spiral steel pipe manufacturers should adopt the appropriate method according to the actual situation when removing the rust, so that they can achieve a better effect.
