Knowledge of carbon steel size head and its application

The size of the carbon steel head should be electrically welded with the cross-sectional area of the irregular ring shell in advance, perhaps the style of the multi-edge fan blocked on both sides, which is covered with the pressure material, and then increase the pressure, the irregular cross-sectional area will slowly form a circle under the internal pressure, and in the final analysis  the result will generate a circular ring shell

Carbon steel size head knowledge

In the carbon steel size head, the eccentric carbon steel size head is first used in the pipe at the diameter of a class of connector, eccentric carbon steel size head is usually the use of shrinkage binding production process, and can also be used to reduce and expand the diameter of the expansion process to carry out binding

And for some additional standard carbon steel size head can also be applied stamping production method. In addition to the eccentric carbon steel size head can be used as a raw material to produce the size of the head, there is another method

There are some additional standard carbon steel size head can also be produced by using the method of stainless steel plate stamping, and the style of the punching die applied when drawing can refer to the appearance standard development method inside the size head, and then use the punching die to carry out the stamping and drawing production of the stainless steel plate after blanking.

The reducing process of the carbon steel size head is to place the tube blank corresponding to the diameter of the big end of the carbon steel size head into the die-casting mold that has been made for a long time, and then bind it along the target of the tube blank shaft

So that the metal can behave along the mold cavity and form a shortened production process, and according to the carbon steel size head of the reduced diameter carbon steel size head, it can be divided into a single binding production and multiple binding production.

The product processing needs to pay attention to is that if the product unit needs to stop for a long time, then the stepping power should be turned off first, and the saw blade motor stops, which saves power.

At the same time, it is also necessary to check the working pulse quality of the tachometer photoelectric coding frequently to avoid hitting the encoder or making it flooded.

According to the different standards of the size of the carbon steel head, the orientation and grinding shape of the flat head knife are adjusted in time, and the end face of the reducing tube after the flat head should be smooth and flat to meet the process requirements

Carbon steel size head is commonly used

In each field, it is first used for the transportation of certain chemical liquids and the treatment of sewage and other levels, which has been generally favored by the shopping mall and has been greatly improved and got rid of the material after several years of continuous discussion, so that the opening of the carbon steel size head is a higher level